Topeak BABYSEAT II Manual De Instrucciones página 15

23. The bicycle to which the BabySeat and rack is mounted must be in good working order, of a type
appropriate for the additional load, and of proper size and adjustment for the operator. See
bicycle owner's manual for additional bicycle loading information. Make sure not to overload your
bicycle when using the BabySeat and rack, and make sure not to attach additional luggage or
accessories to the rack.
24. The bicycle operator should avoid busy streets, bad weather and ride with extra care and
reduced speed.
25. When walking bicycle with child in BabySeat, hold rack with one hand and hold handlebar with
the other.
26. Do not carry a child that is too young to sit safely in the seat. Carry only children that are able
to sit unaided for a longer period of time.
27. Ensure that the seat does not slope forwards so that the child does not tend to slide out of it,
the backrest should slope backwards slightly.
28. Ensure that there are no sharp objects which the child can touch, e.g. frayed cables.
29. Advice that child in BabySeat need to be more warmly clothed than riders and child should be
protected from rain.
30. Check any excessive temperature (e.g. due to direct exposure to sun) of the seat before placing
the child in it.
31. Cover any exposed rear saddle springs to avoid any possible injury.
32. Ensure that the restraint system is not loose or able to become
trapped in any moving parts particularly the wheels, including
when the cycle is ridden without a child in the seat.
33. Please connect your nearest Topeak authorized bicycle dealer
if you found any broken or damage parts of the babyseat.
34. The stated distance between the center of gravity mark and
front of the rear wheel axis should be less than 100 mm.
• Failure to comply with the manufacturer's instructions can lead to serious
injury or death of the passenger/rider!
• Do not use the seat if any part is broken.
• Additional security devices shall always be fastened.
WARNING
• For safety reasons this seat shall only be fitted to luggage carriers conforming
to ISO 11243.
WARRANTY
2-year Warranty: All mechanical components against manufacturer
defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items
returned without a sales receipt will assume that the warranty begins on the
date of manufacture. All warranties will be void if the product is damaged
due to user crash, abuse, system alteration, modification, or used in any way
not intended as described in this operating manual.
* The specifications and design are subject to change without notice.
Please contact your Topeak dealer with any questions.
For USA customer service call: 1-800-250-3068
www.topeak.com
Copyright © Topeak, Inc.
Stamp and signature of Topeak dealer
M-TCS2203-04-05-EN 2020-10
E
N
15