Description Of The Equipment - STAYER WELDING TIG AC/DC 190HF PULSED Manual De Instrucciones

TIG AC/DC 190
V
A
A
%
%
ON
OFF EN60974
- -
Kg
cm
- -
KVA
EXTENDED TECHNICAL FEATURES
Parameter
Nominal voltage
Frequency
No-load voltage
AC pulse frequency
Priming
DC pulse frequency
Pulse width
AC frequency
AC clean width
AC cleaning amplitude
Current slope: start/end
Pre-gas time
Post-gas time
Efficiency
Duty cycle
Protection degree
Cooling
Torch

DESCRIPTION OF THE EQUIPMENT

This product is an equipment for manually welding metals by
means of heat generated by an electric arch.
Technologically, the Stayer Welding equipment is an electric
power supply source for high-frequency power transfer managed
by intelligent control logics.
In contrast to traditional technology which is based on
transformers operating at 50 Hz public grid frequency, Stayer
Welding has a larger power density per weight unit, is more
economizing and has the possibility of accurate, instantaneous
and automatic control of all welding parameters.
As a result, you will more easily produce improved welding with
equipments that consume less and have a lower mass than
equivalent traditional equipments based on heavy transformers.
All Stayer Welding equipments of the TIG series are capable of
shielded electrode welding and tungsten electrode torch welding
with inert gas protection.
HF PULSED
1ph 230
35
10 - 190
60
16
49x19x28
7
TIG AC/DC
Unidad 190
HF PULSED
V 1ph 230
Hz 50/60
V 65
Hz 0.2-20
HF/LA
Hz 0.2-500
% 1-99
Hz 50-100
% -25 +10
% -20 +20
s 0-15
s 0-0.5
s 0-20
% >0.85
cosφ 0.7
EN60529 IP21S
Aire
Model SR 17
ENGLISH
26
26