Descargar Imprimir esta página

Installation Instruction - bosal 009-278 Instrucciones De Montaje

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 15
44 42 07 07/13 / 07.09 /VA
Packing list: 1 Cable set
1 Socket
1 Socket retaining plate
1 Rubber grommet
1.
Disconnect the earth lead from the battery.
2.
Remove internal edge cover of boot near left tail lights.
3.
In order to connect electric bunch to connection socket drill a 6mm diameter hole in proper place at the back wall of
vehicle (e.g. in front of connection socket). Expand existing hole to 20mm diameter. Secure the hole with anti-cor-
rosion agent.
4.
Connect the cable set in the following way:
a) Draw end of lead bunch with metal lead ends through the place referred to in point 3 from boot outside and
through a hole by connection socket handle, assemble supplied grommet in the drilled hole,
b) Draw attached rubber socket retaining plate over the end of cable set (if necessary use anti-friction agent),
c) Socket is connected according to the following scheme:
7 pin
Function
Indicator left
Fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Fog light
13 pin
Function
Indicator left
Trailer fog light
Rear fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Reversing light
Trailer current supply
Charge line plus
Charge line earth
Not assigned
Earth (trailer)
5.
Push the socket with rubber retaining plate and screw the socket tightly onto the retaining plate using the supplied
nuts and screws:
a) Pay special attention to the right position of rubber retaining plate,
b) Put the cable set gently to avoid any folds and to secure it from possible wiping.
Electrical Set for Trailer Connection
7-pin
13-pin
VW Passat Lim. manufactured 04.88 - 10.93
VW Passat Variant manufactured 06.88 - 10.93
3 Screws M5X35
3 Nuts M5
3 Spring washer
8 Cable ties

Installation instruction

Contact description
Cable colour
1
(L)
black/white
grey
2
(54-G)
3
(31)
brown
4
(R)
black/green
5
(58-R)
grey/red
6
(54)
black/red
7
(58-L)
grey/black
grey/white
8
(58-b)
Contact description
Cable colour
1
black/white
2
grey
2a
grey/white
3
brown
4
black/green
5
grey/red
6
black/red
7
grey/black
8
blue/red
9
red/blue 2,5mm
10
yellow 2,5mm
white/brown 2,5mm
11
12
13
white/brown 2,5mm
Part no. 009-278
Part no. 008-938
3 Quick connector (only in 7-pin version)
2 Heat shrinkable tube (only in 7-pin version)
1 Sheet-metal screw (only in 13-pin version)
2 1-input casing (only in 13-pin version)
2
2
2
2
1
2
6
7
3
5
4
8
Contact description in
7-pin socket
8
7
9
1
10
6
2
4
3
5
11
12
13
2a
Contact description in
13-pin socket

Publicidad

loading

Este manual también es adecuado para:

008-938