Publicidad
Idiomas disponibles
Idiomas disponibles
44 08 01 07/13 / 09.03
Packing list: 1 Cable set
1 Socket
1 Socket retaining plate
Disconnect the earth lead from the battery.
1.
2.
Remove loading edge cover of boot and internal cover of boot near left tail lights.
3.
In order to connect electric bunch to connection socket drill a 6mm diameter hole in the centre of the back wall of
vehicle. Expand existing hole to 20 mm diameter. Protect edge with an anticorrosive agent.
Connect the cable set in the following way:
4.
a) Draw end of lead bunch with metal lead ends through the place referred to in point 3 from boot outside and
through a hole by connection socket handle, assemble supplied grommet in the drilled hole,
b) Draw attached rubber socket retaining plate over the end of cable set (if necessary use anti-friction agent),
c) Socket is connected according to the following scheme:
7 pin
Function
Indicator left
Fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Fog light
13 pin
Function
Indicator left
Trailer fog light
Rear fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Reversing light
Trailer current supply
Charge line plus
Charge line earth
Not assigned
Earth (trailer)
5.
Push the socket with rubber retaining plate and screw the socket tightly onto the retaining plate using the supplied
nuts and screws:
a) Pay special attention to the right position of rubber retaining plate,
b) Put the cable set gently to avoid any folds and to secure it from possible wiping.
Electrical Set for Trailer Connection
7-pin
13-pin
3 Screws M5X35
3 Nuts M5
3 Spring washer
Installation instruction
Contact description
Cable colour
1
(L)
yellow
2
(54-G)
blue
3
(31)
white/black
4
(R)
green
5
(58-R)
brown
6
(54)
red
7
(58-L)
black
8
(58-b)
grey
Contact description
Cable colour
1
yellow
2
blue
2a
grey
3
white/black
4
green
5
brown
6
red
7
black
8
black/red
9
red/blue 2,5mm
10
yellow 2,5mm
11
brown/green
12
13
white 2,5mm
Part no. 003-648
Part no. 007-118
Daewoo Espero manufactured 95-97
1 Rubber grommet
2 Heat shrinkable tube
3 Quick connector (1x reserve)
2
2
2
2,5mm
2
1 Sheet-metal screw
6 Cable ties 100 mm
1
2
6
7
3
5
4
8
Contact description in
7-pin socket
8
9
7
1
10
6
2
4
3
5
11
12
13
2a
Contact description in
13-pin socket
Publicidad
