Air Liquide rinowash Ego Instrucciones De Uso página 9

remain lit. While recharging, the device does not operate and it cannot be used.
After recharging, remove the cable and close the cap of the micro USB socket.
INSTRUCTIONS FOR USE
The following operations will be performed with the power supply cable
disconnected and the cap of the micro USB socket is well closed.
1) Position the internal chamber (5) on the base unit (1), press it and rotate it clockwise
until it is blocked (Fig. F)
2) Pour the liquid (maximum 15 ml) in the internal chamber (Fig. B) checking the
correspondence of the liquid with the graded scale
3) Insert the atomiser (6) into the tube of the tray: a "click" will indicate that the final
position has been reached (Fig. G). The reading of the graded scale should only be
made when the atomiser is not inserted in the internal chamber.
4) Insert the external chamber (7) by turning it slightly clockwise while closing it to
cover the sealing gasket.
5) Bring the device close to the nose by laying the top outlet on one nostril (Fig. C).
During use, sit upright and in a relaxed position.
6) To obtain the nebulisation, press the power button (2), to stop the treatment, release
the button
7) The nebulized liquid comes out from the hole of the external chamber (7) while in
the cavity between the external chamber and the internal chamber, the residual
liquid is collected (Fig. D)
8) During washing, breathe normally with your nose, keeping the opposite nostril
blocked with one finger. If necessary, blow from the nostril during treatment to help
expel mucus. Alternate nostrils as needed
9) The nebulization is very quick and lasts only a few minutes, when the liquid
contained in the device is exhausted, release the activation button of the device
INDICATIONS
Physiological washing of the nasal cavities
from 0 to 3 to solve the inability of the child to
years blow his/her nose
with saline solution, thermal
water or hypertonic solution
(Rinowash solution)