Avidsen Visia Manual Del Usuario página 32

d - CONFiGurATiON
1 SMTP server: varies with email provider used
to send the alert. In our example using Gmail,
smtp.gmail.com
2 Server port: depends on the email provider
of the address sending the alert. In our
example using Gmail, 587
3 Security type: security when logging in,
associated with the email provider. In our
example using gmail,STARTTLS
4 Authentication: indicates whether the SMTP
server used requires a username or
password to connect. In our example this
must be activated.
5 Username: Name that you must enter to
log in to the mailbox that will send out the
alerts. In our example using Gmail, this is the
sender's address:
sender-address@gmail.com
12
EN
All manuals and user guides at all-guides.com
1
2
3
4
10 Message: body of the email
11 Test: allows you to simulate an alert, send
5
6
12 Click on "Appliquer " (Apply) to save
7
8
9
10
11
12
720P WiFi iP camera
6 Password: The password used to log in to
sender-address@gmail.com, in our example
7 Send to: Enter the email address here that
will receive the alerts. In our example:
addressee@gmail.com
8 Sender: Name that you must enter to log
in to the mailbox that will send out the alerts.
In our example using Gmail, this is the sender
address: sender-address@gmail.com
9 Subject: subject of the email alert
an email and to check that your camera is
correctly configured.
your settings.
Note: it does not matter who the email provider
of the recipient is, as it is the email provider of the
sender that dictates what needs to be entered.
However, you must ensure that the alerts are not
treated as spam by the recipient's inbox.
Our technical support will not be able to help
you with these settings if you contact them.
The settings depend on the email account from
which you are sending. For more information,
please contact the email account provider of the
address from which you are sending.
When you have finished configuring your camera,
it will be able to send emails. Next, it is time to
configure when it does so, in the
"Action sur alerte" (Action upon alert) menu in
the camera settings: