Access To All Settings; Configuration; Example: Programming An Email Alert To Be Sent When Motion Is Detected - Avidsen Visia Manual Del Usuario

2 - ACCESS TO ALL SETTINGS

2.1 - Configuration

From the camera list, click on the
to the right of your camera's name (Android) or
on IOS, to display the settings menus:
1 Changing the password to log in to the
camera ("admin", by default)
2 Activation/deactivation and sensitivity of the
motion detector
3 Actions to take if motion is detected:
notification, send an email, saving a file to
the memory card (requires a micro SD card
[not included] to be inserted into the camera)
All manuals and user guides at all-guides.com
720P WiFi iP vcamera
icon
1
2
3
4
5
6
7
8
9
10
11
12
13
d - CONFiGurATiON
4 Activation/deactivation of continuous
recording to the microSD card and the length
of videos (requires a micro SD card [not
included] to be inserted into the camera)
5 Volume of the microphone and speaker
6 Video quality settings and number of frames
per second. Warning: if you set the video
quality to high with respect to the quality
of the internet connection of your camera
and smartphone or tablet, you may
experience choppy video or loss of connection.
Two streams can be adjusted: they correspond
with the maximum resolution = "résolution
Max", and low resolution = "résolution
faible", which you can select from the live
video display.
7 Configure the Camera's current WiFi settings
8 If a microSD card has been inserted into the
camera, you can reformat it and display its
total and free memory
9 Setting the date and time stamps on the
camera's video
10 Settings for sending emails in the event
of an alert (see the below example)
11 Settings for saving to an FTP server
12 Remote camera restart
13 Camera network information
2.2 - Example: programming an email alert to
be sent when motion is detected
To program an alert to be sent when motion
is detected, you need 2 email addresses: the
address of the sender which will be used by
the camera, and the address which will receive
the alerts. The camera uses the username and
password of the sender address to connect and
send the email. Configuration depends on the
chosen email provider's settings.
Note: the 2 email addresses can be the same
(you will simply be sending an email to yourself).
In our example, we use www.gmail.com:
sender-address@gmail.com sends the alerts,
recipient@gmail.com receives the alerts.
Both addresses need to have been created
beforehand.
First, go to "Réglages Email" (Email settings):
EN EN
11