Troubleshooting - Flymo Power Vac 3000 Instrucciones De Empleo

5. STORAGE
To put into storage:
The product must be stowed away from children.
1. Disconnect the mains cable.
2. Clean the product.
3. Stow the product in a dry area where it has protection
from frost (Do not stow a dirty collection bag).

6. TROUBLESHOOTING

WARNING! Risk of physical injury!
Cut injury when the impeller turns or the
product starts accidentally.
v Wait for the impeller to stop, disconnect the
product from the mains and use gloves before
you do troubleshooting.
Problem
Product does not start
Product vibrates abnormally
For any other malfunctions please contact the Husqvarna UK Ltd. Customer Service.
Repairs must only be done by Husqvarna UK Ltd. service departments or specialist dealers
approved by FLYMO.
All manuals and user guides at all-guides.com
Disposal:
(in accordance with RL2012/19/EC)
The product must not be added to usual
household waste. Refer to local environmental
laws for discarding.
v Important: Make sure that the product is discarded
Possible Causes
Blower tube, elbow tube or vacuum
tube is not assembled correctly.
Collection bag is full.
Extension cable is disconnected.
Mechanical failure.
Debris in air intake area.
Mechanical failure.
through your municipal recycling collection centre.
Remedy
v Assemble the tubes correctly
(see 2. ASSEMBLY).
v Empty the collection bag.
v Connect the extension cable.
v Contact your authorized service
dealer.
v Clean the product. Remove any
debris.
v Contact your authorized service
dealer.
7