Fimar EASY LINE HBS220JS Manual Del Usuario página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
When using electrical appliances, basic precautions should always be followed, including the following:
• the power must be complied with electric requirements on the label rating, it will cause the serious trouble of
the fire or the machine if improperly use.
• The machine must be earthed when using, it is dangerous to get an electric shock if not ground or not reliable
to be grounded.
• Please turn off all switch and unplug when Emergency happen.
• The hand or other part of body not allow to enter workspace when the machine open, or will hurt you.
• The machine should be repaired by manufacturer or agent if the machine fault.
• We are not Responsible for hurting or equipment fault as self amending machine.
• When the electric wire damage, must instead of it.
• The electric wire must be used special soft wire, buy it from manufacturer or repair department.
• The machine can not be wash by water, the machine is not the waterproof structure, it will cause get an
electric shock and damage the mechanical departments and electric parts.
• Please turn off all switches when not operate and unplug.
• Please stop operate and unplug when workman clean the machine.
• Must to stop the machine operate when find the machine operate unusually.
• Often to check blade-cover, table loading meat, slice and other parts whether tight or damage.
• Can not cut the frozen meat below the temperature of -6 .
• Please attach the manual operation when resell the machine.
• Please contact with our when damage or lose the manual operation.
• Please contact us when you meet other items which not detail in the manual operation.
Ground terminal must be ground before the slicer is fixed.
Avoid resulting in personal server injury due to leakage.
Slicer operates automatically; keep hand clear, Failure to comply may result inpersonal server injury due to
leakage.
Clean and change blade of slicer, be careful of blade-edge hurt your finger.
 
 
Technical information             
Model
Voltage
Power
Blade diameter
Dimension
Weight
Noise level
 
                                                                                                       
HBS220JS
HBS250
220~240V
220~240V
120W
220 (mm)
250 (mm)
490x370x330 (mm)
520x420x380(mm)
12kg
3
HBS300
220~240V
150W
250W
300 (mm)
560x490x450(mm)
18kg
23kg
< 70 dB(A)
HBS300L
220~240V
250W
300 (mm)
560x490x450(mm)
24,5kg

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Easy line hbs250jsEasy line hbs300jsEasy line hbs300ljs

Tabla de contenido