Home Decorators Collection 35442-HBUM Guía De Uso Y Cuidado página 14

Assembly - Flushmount (continued)
6
Mounting the fan
WARNING: The locking slots of the celling canopy are provided only
as an aid to mounting. Do not leave the fan assembly unattended
□
Carefully unhook the fan from the mounting bracket (B) and
align the locking slots of the ceiling canopy (C) with the two
screws in the mounting bracket (B). Push up to engage the
slots and turn clockwise to lock the canopy (C) in place. Im-
mediately tighten the two canopy screws (AA) firmly.
□
Install the remaining two canopy screws (AA) into the holes in
the canopy (C) and tighten firmly.
AA
8
Installing the lamp
□ A wire connector (female) is located inside the electrical switch
housing and a male connector extends from the lamp. Push them
together.
□ A wire connector (male) is located inside the electrical switch
housing and a female connector extends from the lamp. Push them
together.
□ Place the lamp (H) into the electrical switch housing aligning the
three flat areas on the lamp (H) with the three raised dimples
in the lamp (H). Turn the lamp (H) clockwise until it stops.
7
Attaching the fan blades
□ Attach the fan blades (A) to the fan motor assembly (G)
by using the blade screws (BB) and fiber washers (CC).
Tighten blade screws (BB) securely.
□ Repeat these steps for the remaining blades (A).
AA
B
C
G
G
H
14
BB
CC
A
G