Publicidad
3
Drill four pilot holes using a 1/8 in. (3 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2 ¾ in. (70 mm). Be sure to
drill into the center of the studs.
4
2 3/4 in. (70 mm)
1/8 in.
(3 mm)
Install wall plate
bolts only until they are pulled firmly against the wall plate.
bolts
plate
to the next step.
Go to STEP 3 on PAGE 12.
06
using four lag bolts
06
CAUTION:
Avoid potential personal injury or property damage! All four lag
07
MUST BE firmly tightened to prevent unwanted movement of the wall
. Ensure the wall plate is securely fastened to the wall before continuing on
06
08
07
07
and four washers
08
. Tighten the lag
9
Publicidad
