Publicidad
Technical Data
Operating pressure:
Recommended operating pressure:
MPa
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Test certificate
DVGW
The filter insert (A) must be used to ensure the standard flow rate and to protect the hand shower against
incoming dirt by pipework. Do you want a larger water flow rate, then you must use the filter packing (B)
instead of the filter insert (A).
Incoming dirt leads to defects or/and can damage parts of the hand shower; such caused faults voids all
liability and guarantee claims.
max. 0,6 MPa
0,1 – 0,4
Max. 60° C
P-IX
SVGW
P-IX
9551/ID
Assembly
English
Hansgrohe showers can be used together with
hydraulically and thermically controlled
continuous flow heaters if the flow pressure is
at least 0,15 MPa before the shower fitting.
ACS
NF
WRAS
KIWA
3
Publicidad
