Oven; Gas Heating; Function Of The Various Components; Installation Instructions - Eurotec G4SF9 Instrucciones Para La Instalación, El Uso Y El Mantenimiento

GAS COCKS in die formed brass, provided with relief valve with thermocouple to cut off the gas automatically if the pilot
flame is accidentally extinguished. Adjustment between minimum and maximum flow rate.
CONTROL KNOBS made of heatproof material.
1.4

OVEN

COOKING CHAMBER in high-temperature and acid resistant porcelained steel, with internal dimensions complying to
GASTRONORM 2/1. Thermal insulation with high-density glass wool. Grill's lateral supports made of chromate steel bars,
easily extractable for cleaning. Grill made of chromate steel bar.
OVEN DOORS with double panelling and insulating glass wool interspace, door headers of enamel steel, handles mounted
on athermal supports, and door seal. Balanced spring hinges.
1.5

GAS HEATING

Stainless steel burner with self-stabilising flame. Thermostat adjustable temperature 150÷300°C with safety valve and
thermocouple for automatic gas interruption in case of accidental pilot extinguishment.
Piezoelectric ignition of the oven's "Targhet" pilot.
1.6

FUNCTION OF THE VARIOUS COMPONENTS

- The burner indirectly heats the air in the oven.
- The nozzle determines the heating potential for each type of gas or pressure.
- The pilot burner turns on the main burner and heats the thermocouple, which produces mV at the coil of the gas thermostat.
- Thermocouple; if the point consisting of two materials is heated, it produces the necessary mV to magnetise the coil of the
security valve.
- The gas thermostat closes when the pilot burner does not have enough gas. The thermostat may be set a t a temperature of
175 - 300 °C.
- Piezoelectric switch.
2.
Installation and transformation for using other types of gas, if required, must be performed by qualified persons in
accordance with current regulations.
See technical data tables: 1.1 and 2.5
WARNINGS:
If the unit is installed against a wall, the wall needs to withstand temperatures of 80°C and must be fireproof. Before
proceeding with the installation, remove the protective plastic film and eliminate any adhesive residues by means of a
suitable product for cleaning stainless steel. Install the oven horizontally, correct positioning is obtained by turning the
levelling feet. If the unit is installed on its own, it is advisable to secure it to make its stability safer.
2.1

INFORMATION ON FREE STANDING GAS RANGES

This booklet applies to our gas range type A Category II (Natural Gas and L.P.G.).
See table 1.1 and 2.5
The plate according to EN437 and EN 203 standards part 1 is on the back and inside.
Example of Italian plate: Cat. II 2H3+
Pe = Incoming pressure
Pi = Nozzle pressure
All manuals and user guides at all-guides.com
V
IT-GR-GB-ES-IE
II2H3+
Cat.
P n 20,29/37
LU
Cat. II2E3P
P n
20,37,50
Qn
kW
(Hi)
- 19 -

INSTALLATION INSTRUCTIONS

Mod.
Matr.N°
Hz
PT FR-BE
II2H3+ II2E+3+
20,29/37 20/25,29/37
IS-DK-FI-SE AT-CH
II2H3B/P II2H3B/P
20,29 20,50
3
G20 m /h
3
G25 m /h
Type
kW
tipo
NL
II2L3P
mbar
25,30,50
DE NO
II2ELL3B/P I3P
mbar
20,20,50 30
G30 Kg/h
G31 Kg/h
GB