Leuze MLD300-T3 Manual Del Usuario página 7

Safety
NOTICE
The connecting and operating instructions for the multiple light beam
safety device system are provided solely with the receiver or trans-
ceiver, not, however, with the transmitter or deflecting mirror compo-
nents.
WARNING
Proper selection and use of the safety sensor
If the safety sensor is not selected and used correctly, severe acci-
dents may result.
The relevant operating instructions contain further information on the safe imple-
mentation, testing and operation of the safety sensor. You can find the original op-
erating instructions and the EU Declaration of Conformity by entering the part
number of the safety sensor in the search field on our website www.leuze.com.
The part number can be read on the name plate of the sensor under the "Part
No." entry.
The safety sensor meets the basic requirements and the other relevant provisions
of the machinery directive 2006/42/EC.
Ä
Carefully and completely read and observe the documents applicable to your
tasks before working with the safety sensor.
Ä
Carefully follow all notices regarding the safety sensor.
Ä
Make certain that all other persons know and observe the notices that apply
to them.
EN
7