EN
Laser safety notices
(only for devices with integrated alignment laser MLDx00-(X)TxL)
ATTENTION
LASER RADIATION – CLASS 2 LASER PRODUCT
Do not stare into beam!
The device satisfies the requirements of IEC/EN 60825-1:2014 safety
regulations for a product of laser class 2 and complies with 21 CFR
1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed. 3.,
as described in Laser Notice No. 56, dated May 8, 2019.
Ä
Never look directly into the laser beam or in the direction of re-
flected laser beams!
If you look into the beam path over a longer time period, there is a
risk of injury to the retina.
Ä
Do not point the laser beam of the device at persons!
Ä
Interrupt the laser beam using a non-transparent, non-reflective
object if the laser beam is accidentally directed towards a person.
Ä
When mounting and aligning the device, avoid reflections of the
laser beam off reflective surfaces!
Ä
CAUTION! Use of controls or adjustments or performance of pro-
cedures other than specified herein may result in hazardous light
exposure.
Ä
Observe the applicable statutory and local laser protection regula-
tions.
Ä
The device must not be tampered with and must not be changed
in any way.
There are no user-serviceable parts inside the device.
Repairs must only be performed by Leuze elec-
tronic GmbH + Co. KG.
Ä
The alignment laser emits constant radiation that has a maximum
output power of 1 mW and is emitted from the device collimated.
1
1
Laser warning sign
2
Laser aperture
3
Laser information sign (on the rear side of the device)
*
on each light axis
8