Effects - Omnitronic DJS-1200 Manual Del Usuario

Ocultar thumbs Ver también para DJS-1200:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
Adjusting and memorizing the sample-pitch and sample-volume
The sample-pitch and the sample-volume can individually be adjusted and memorized for every sample.
Press the Sampler-button (LED on) and the respective Bank/Cue-button in order to recall the sample.
Press the Hold-button (LED on) in order to hold the parameter-adjustments. If you do not press the Hold-
button, the adjustments are only temporary and the CD-player returns to the memorized settings.
By turning the Parameter Time-control, you can adjust the sample-pitch to SP 1000 (maximum pitch-
adjustment) to SP -1000 (minimum pitch-adjustment).
By turning the Parameter Ratio-control, you can adjust the sample-volume to SV 255 (maximum sample-
volume) to SV 000 (minimum sample-volume).
These temporary settings remain until you switch off the CD-player.
If you wish to memorize these settings with the sample, press the Memory/Recall-button (LED on) and hold it
for one second. In this way, the adjusted parameters can be recalled via the Recall-function.
Using temporary samples
The temporary samples on the Bank/Cue-buttons remain in the buffer memory if you change the CD without
switching the CD-player off. Please note that these samples are only temporarily available and cannot be
memorized on the new CD. This means, that such temporary samples will be deleted from the buffer
memory when you will switch off the CD-player. However, the original samples can be recalled from the
respective CD using the Recall-function.

6.11 Effects

The different effects can be activated via the respective Effect-button. If the effect is activated, the respective
LED is on.
The effect-parameters can be adjusted via the Parameter Time-control and the Parameter Ratio-control.
Press the Hold-button (LED on) in order to hold the parameter-adjustments. If you do not press the Hold-
button, the adjustments are only temporary and the CD-player returns to the memorized settings.
If you wish to memorize these settings press the Memory/Recall-button (LED on) and hold it for one second.
In this way, the adjusted parameters can be recalled via the Recall-function.
You can recall all memorized effect-parameters from up to 128 CDs after switching the CD-player off.
Therefore, you have to switch the CD-player on, press the Memory/Recall-button (LED on) and insert the
respective CD. The display shows "Recall" until the loading process is finished.
Scratch-function:
The scratch-function resembles the scratching with a turntable. By turning the Scratch-wheel forwards and
backwards, different scratching-effects can be produced. If you turn the Scratch-wheel continuously
forwards, the playback resembles the playback-speed via the Play/Pause-button.
Flanger-effect:
When choosing the Flanger-effect, the effect of a jet engine is added to the original sound. The Flanger-time
(PT) modifies the sound of the flanger-effect and can be adjusted between 0 and 9990 ms.
The Flanger-rate (PR) modifies the depth of the flanger-effect and can be adjusted between 0 and 255.
Pan-effect:
When choosing the Pan-effect, the sound is cyclically directed to the left and right side. The Pan-time (PT)
modifies the changing speed and can be adjusted between 0 and 9990 ms.
Echo-effect:
When choosing the Echo-effect, an echo is added to the original sound. The Echo-time (PT) modifies the
repeating frequency and size of the echo and can be adjusted between 0 and 2000 ms.
The Echo-rate (PR) modifies the feedback of the echo-effect and can be adjusted between 0 and 255.
Filter-effect:
When choosing the Filter-effect, the original sound is modified in accordance with the Parameter-control.
The Filter-rate (PR) can be adjusted between 0 and 255.
Auto Filter-effect:
When choosing the Auto Filter-effect, the original sound is modified in accordance with the Parameter-
controls. The Auto Filter-time (PT) can be adjusted between 0 and 9990 ms.
The Filter-rate (PR) modifies the feedback of the echo-effect and can be adjusted between 0 and 255.
34/69
10602296X10NXS_V_1_0.DOC

Publicidad

Tabla de contenido
loading

Tabla de contenido