Grundig MC 3140 Manual Del Usuario página 24

OPERATION­_____________________________
Beard trimming
1
Adjust the trimming length; see
the "Setting the trimming length"
section.
2
Push the On/Off switch
switch on the appliance.
3 Place the cutting head
beard.
4 Move the cutting head
the direction of hair growth. Apply
only light pressure and cut with
slow, gentle movements.
5
After use, switch off the appliance
with the On/Off switch
24 ENGLISH
Notes
If the appliance becomes
7
blocked by thick hair while you
are using it, switch it off. If run-
ning it from the mains, unplug
to
B
the socket. Remove the adjust-
able comb and clean the cutting
head with the brush supplied. If
on the
A
the blades only move slowly or
not at all, clean the appliance
against
A
as described in the "Cleaning
and Care" section.
For trimming contours, remove
7
the adjustable comb 1
adjustable comb 2
.
B
appliance without the combs
(cutting length is 1.5 mm).
or
E
. Use the
F