Technical Data - Atlas Copco LZB33-LB-AR0026-11 Manual De Instrucciones

LZB33-LB-AR0026-11 ATEX

Technical Data

IP Rating
The IP Rating of the air motors refer to the mechanical cas-
ing according to the IEC 60529 standard. The IP rating does
not cover corrosion resistance or any liquids other than clean
freshwater.
Technical data
Ordering No
Model
Air consumption at free
speed
Air consumption at free
speed
Air consumption at max out-
put
Air consumption at max out-
put
Braking torque
Braking torque
Built in brake
External parts material
Free speed
Max output
Max output
Min starting torque
Min starting torque
Ratio
Rotation direction
Shaft loading code
Shaft type
Speed at max output
Stall torque
Stall torque
Torque at max output
Torque at max output
Vane type
Weight
Weight
Inlet hose
Inlet hose
Ingress protection rating
Outlet hose
Outlet hose
8411034070
LZB33-LB-AR0026-11
l/s
cfm
7.9 l/s
16.8 cfm
32 Nm
24 ft lb
Yes
Hardened steel/Aluminium
230 r/min
0.24 kW
0.32 hp
20 Nm
14.8 ft lb
Reversible
d
Keyed
120 r/min
38 Nm
28 ft lb
19 Nm
14 ft lb
Lubrication free
2.1 kg
4.6 lb
10 mm
0.4 in
IP66
10 mm
0.4 in
© Atlas Copco Industrial Technique AB - 9836 7281 00
Declarations
EU DECLARATION OF INCORPORATION
AND EU DECLARATION OF CONFORMITY
We Atlas Copco Industrial Technique AB, S-105 23
STOCKHOLM SWEDEN, declare under our sole responsi-
bility that this product (with name, type and serial number,
see front page) fulfils the following essential requirements of
Machinery Directive 2006/42/EC, and must not be put into
service until the final machinery, into which it is to be incor-
porated, has been declared in conformity with that Directive.
It is in conformity with the following Directive(s):
2006/42/EC (Annex I, clauses 1.1, 1.2 (excluding 1.2.4.3),
1.3, 1.4, 1.5, 1.6, 1.7), 2014/34/EU
Harmonized standards applied:
DIN EN 1127-1:2011, DIN EN ISO 12100:2010, EN ISO
80079-36:2016, EN ISO 80079-37:2016
The relevant technical documentation was compiled and was
communicated in accordance with Machinery Directive
2006/42/EC part B of Annex VII and ATEX Directive
2014/34/EU Article 13 (1) b) ii in the Notified Body SP (EU
Identification No 04 02) in Sweden. Authorities can request
the technical file 9836 4610 00 for ATEX Directive 2014/34/
EU in paper form from:
Product Compliance Manager, Atlas Copco Industrial Tech-
nique AB, S-105 23 Stockholm Sweden
Stockholm, 25 October 2019
Carl von Schantz, Managing Director
Signature of issuer
Information regarding Article 33 in REACH
The European Regulation (EU) No. 1907/2006 on Registra-
tion, Evaluation, Authorization and restriction of Chemicals
(REACH) defines among other things requirements related to
communication in the supply chain. The information require-
ment applies also to products containing so called Substances
of Very High Concern (the "Candidate List"). On 27 June
2018 lead metal (CAS nr 7439-92-1) was added to the Candi-
date List.
In accordance with the above this is to inform you that cer-
tain mechanical components in the product may contain lead
metal. This is in compliance with current substance restric-
tion legislation and based on legit exemptions in the RoHS
Directive (2011/65/EU). Lead metal will not leak or mutate
from the product during normal use and the concentration of
lead metal in the complete product is well below the applica-
ble threshold limit. Please consider local requirements on the
disposal of lead at product end of life.
Safety Information
3