Programmed Play - Onix OC103 Guia Del Usuario

Previous/Next
1. During normal playback, press〈
2. During normal playback, press〈
Repeated play
1. To continuously play tracks of the current disc, press〈REP〉key on remote control once. Display area shall display
"T" in front of the track time, then it shows the track number and "T" alternately. To continuously repeat playing
tracks of the entire disc, press〈REP〉key on remote control again. Display area shall display "A" in front of the
track time, then it shows the track number and "T" alternately. To cancel repeated play function, press〈REP〉key
on remote control again. Display area shall display normally.
2. This key is not functional if pressed when the disc is stopped.
A-B segment repeated play
1. Press 〈A-B〉 key on remote control at the start point of your desired content. Display area shall display A- in front
of the track time, then it shows the track number and "A-" alternately. Press〈A-B〉key again at the stop point of
your desired content. Display area shall display "A- B" in front of the track time, then it shows the track number and
"A B" alternately. And the machine shall repeatedly play the segment between start point "A" and stop point "B"
until〈A-B〉key is pressed again to cancel segment play.
2. This key is not functional if pressed when the disc is stopped.
Fast Rewind/fast Forward
1. During normal playback, press button (
playback.
2. During normal playback, press (
playback.
Track scanning
1. During playback and stop mode, press〈SCAN〉key on remote control, screen area shall display "S" in front of the
track time and then it shows the track number and "S" alternately, indicating track scan is functioning. Track scanning
function plays the first ten seconds of a track sequentially until all tracks are played. Number of corresponding track
shall be displayed on screen area. Once all tracks are scanned, the machine will be in stop mode.
2. To cancel during track scanning, press〈SCAN〉key or〈 〉key once.
Random play
1. During stop or normal playback mode, press〈RANDOM〉key on remote control, display area shall display "R" in
front of the track time, then it shows the track number and "R" alternately, indicating random play is functioning.
Random play will play the disc until all tracks are played.
2. To cancel during random play, press〈RANDOM〉key or〈 〉key once.

Programmed play

1. Press〈PROG〉key on remote control during stop mode, the display area shall display "P00 - 00 ".
2. Input the number of desired tracks one by one. If the input is wrong, press〈PROG〉key again to cancel
programming. Then press key again to re-input desired track.
3. Once programming completed, press〈 〉key on machine or remote control to start playing programmed tracks.
Display area shall display "M" in front of track time, then it shows the track number and "M" alternately.
4. To cancel programmed play, press〈 〉key twice.
〉button on front panel or key on remote control to play the previous track.
〉button on front panel or key on remote control to play the next track.
) to search backward at high speed, release this key to return to normal
) button to search forward at high speed, release this key to return to normal
5