Unpacking The Oven; Earthing; Installation (Built-In) - Essentielb EMEG253n Instrucciones De Uso

Unpacking the oven

Remove all packaging and accessories from inside and outside the appliance, and examine
it carefully to see if it has suffered any visible damage during transport.
If the appliance has suffered visible damage such as door deformation, do not use it and
contact the after-sales department of your retailer.
Before using your microwave oven, clean the inside with a damp cloth.

Earthing

This microwave oven is equipped with an earthed electrical outlet. Earthing
reduces the risk of electric shock by allowing a possible short-circuit
current to escape through the earth wire.
WARNING: Improper use of the grounding plug may pose a risk of electric shock.
For questions concerning the earthing or electrical connection, please consult a qualified
individual.
If an extension is required, use only a three-wire extension with earthing.Installing the appliance
26

installation (built-in)

The appliance must be installed in accordance with national electrical installation rules.
•
Do not install your microwave oven on a hob or any appliance that produces heat. This may
•
damage your oven and the warranty will not apply in this case.
Do not install this microwave oven outside or in very humid or excessively hot rooms.
•
Neither should you place this microwave oven near a radio or television set, as the magnetic
•
field from the oven may create interference and noise.
Do not place anything on top of the microwave oven.
•
Before plugging in your appliance, make sure the electrical voltage in your home matches
•
that on the microwave oven nameplate and that the power cord plug is the right kind for
the outlet.
Plug your microwave oven into a grounded wall outlet.
•
WARNING! You must not remove the mica plate (wave outlet) which is screwed into the
•
oven cavity to protect the magnetron.
27