All manuals and user guides at all-guides.com Note: Refer to your user’s guide for information about cleaning your device. Getting Started Turn off computer’s power before connecting the scanner, then power up the computer once the scanner is fully connected. When the base is connected and powered up, put the scanner in the base to establish a link.
Página 3
All manuals and user guides at all-guides.com Connecting the Scanner USB: CCB04-010BT Base: CCB05-010BT Base:...
All manuals and user guides at all-guides.com Keyboard Wedge: CCB04-010BT Base: CCB05-010BT Base:...
Página 5
All manuals and user guides at all-guides.com RS232 Serial Port: CCB04-010BT Base: CCB05-010BT Base:...
Página 6
All manuals and user guides at all-guides.com RS485: CCB04-010BT Base: CCB05-010BT Base:...
Página 7
All manuals and user guides at all-guides.com Reading Techniques The view finder projects an aiming beam that should be centered over the bar code, but it can be positioned in any direction for a good read. Standard Product Defaults The following bar code resets all standard product default settings.
Página 8
USB Serial If you are using a Microsoft® Windows® PC, you must download a driver from the Honeywell website. The driver will use the next available COM Port number. Scan the following code to program the scanner to emulate a regular RS232-based COM Port.
Página 9
All manuals and user guides at all-guides.com #$@[\]^‘{|}~ Refer to the ISO 646 Character Replacements chart in your User’s Guide to view the character replacements for each country. USA (Default) Belgium Denmark Finland France Germany/Austria Great Britain Italy...
Página 10
All manuals and user guides at all-guides.com Norway Spain Switzerland Note: For a complete list of country codes, see the User’s Guide for your product. Locked Link If you link a scanner to a base using the Locked Link Mode, other scanners are blocked from being linked if they are inad- vertently placed into the base.
Página 11
All manuals and user guides at all-guides.com Override Locked Scanner If you need to replace a broken or lost scanner that is linked to a base, scan the Override Locked Scanner bar code with a new scanner, and place that scanner in the base. The locked link will be overridden;...
All manuals and user guides at all-guides.com Presentation Mode Streaming Presentation™ When in Streaming Presentation mode, the scanner leaves the scan illumination on all the time and continuously searches for bar codes. Streaming Presentation Mode Suffix If you want a carriage return after the bar code, scan the Add CR Suffix bar code.
Página 13
All manuals and user guides at all-guides.com Add Code ID Prefix to all Symbologies Scan the following bar code if you wish to add a Code ID prefix to all symbologies at once. Add Code ID Prefix To All Symbologies (Temporary) Note: For a complete list of Code IDs, see the User’s Guide for your product.
Página 14
All manuals and user guides at all-guides.com Charge Pack Status - Xenon 1932BF only When using a Xenon 1932BF, charge status is indicated by the scanner’s LED when the scanner is out of the base and has been idle for 5 seconds. Approximate Charge Scanner LED...
Página 15
Patents For patent information, see www.hsmpats.com. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.
Página 16
If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. Honeywell International Inc.
Página 17
ﻭﺍﻧﻘﺮ ﻋﻠ )מצא משאבים < אחריות Product Warranty < Get Resources על (Záruka výrobku). Get Resources > Product Warranty (Pobierz zasoby > .(מוצר Gwarancja produktu). Honeywell International Inc. 1932-ML-RS Rev (a) 9680 Old Bailes Road 3/18 Fort Mill, SC 29707 USA...