Publicidad
Charge Pack Status - Xenon 1932BF only
When using a Xenon 1932BF, charge status is indicated by the
scanner's LED when the scanner is out of the base and has been
idle for 5 seconds.
Scanner LED
Yellow
3 sets of flashes
Red
3 sets of flashes
EZConfig-Scanning
To access additional features for the scanner, use EZConfig-
Scanning, an online configuration software tool, available from
our
website.
Support
To search our knowledge base for a solution or to log into the
Technical Support portal and report a problem, go to
www.hsmcontactsupport.com.
User Documentation
For the user guide and other documentation, go to
www.honeywellaidc.com.
All manuals and user guides at all-guides.com
Scanner Beep
2 short beeps per
flash
2 short beeps per
flash
Approximate
Charge
Expected
Level
Scans*
30%
100
10%
50
13
Publicidad
