Beper P101FRI012 Manual De Instrucciones página 15

Multifunctional Digital Air Fryer Use instructions
Air Flow Racks (Fig. A, nr. 6)
To be used not only for food dehydration, but also to cook crispy snacks, pizza, bread or many other dishes.
Insert each air flow rack by sliding it through the side parallel grooves until it reaches the end of the inner wall.
Place the air flow rack closer to the top heating element for faster cooking or for extra crisp.
If more than one air flow racks are used at the same time, interchange their position in the mid-cycle for even cooking.
Rotating Basket (Fig. A, nr. 7)
Great for chips, snacks, potatoes, vegetables, nuggets, squid and onion rings, frozen foods, roasted nuts and coffee
beans etc....
For even cooking, do not overfill the rotating basket with food to be cooked.
Shut the basket properly using the closing clip so that it will not open during the cooking.
Firstly insert the rotating basket's left end (characterized by its 1 notch
until it gets engaged into its holder, then insert the right shaft (having 2 notches
that both ends are fixed properly to activate rotation.
Rotisserie Kit (Fig. A, nr. 8)
The rotisserie kit includes a shaft with two removable forks on its both ends, and two locking screws. To be used for
large meat roasts or whole poultries.
Unscrew and remove one fork from one end of the shaft, force the shaft lengthwise through the marinated roast or
whole poultry until it gets fixed into the second fork.
Put back the first fork into its place and tighten. Do not over tighten it as you will need to untighten to remove the roast
when it's ready.
Attention: Make sure that roast, chicken or any ingredient to be cooked with this rotisserie kit is not too
big to rotate freely within the cooking space. Maximum weight of chicken or roast: 1000 g.
Insert firstly rotisserie kit's left end (characterized by its 1 notch
gets engaged into its holder, then insert the right shaft (having 2 notches
ends are fixed properly to activate rotation.
Removal Handle (Fig. A, nr. 9)
Use this handle to remove the rotating basket and the rotisserie kit from the main unit.
Place the removal handle's tongs beneath the two ends of the rotating basket or the rotisserie kit, firstly lift the right end and
shift it slightly to the right until the left end slips out of the left slot. Carefully remove the basket or rotisserie kit from the unit.
Digital Control Panel: Descriptions (Fig. B) and How to Use it
1. Power Button
Once the appliance is plugged in, the power button will light up. Press the power button once for 2 seconds and the full
panel will be illuminated. Pressing it a second time will activate the cooking process at the default temperature of 185°C
and time of 15 minutes. Pressing the power button at any time during the cooking process will put the appliance in pause.
Pressing the power button for 2 seconds will shut down the appliance. Right after the digital screen shows "OFF", the motor
will keep running for another 15 seconds until a 3 beep warning tone is heard.
2. Internal Light
Selecting this button will help you check cooking progress while appliance is in operation.
Opening the door during the cooking process will put the appliance in pause. Internal light will illuminate if door is open.
3. Rotation Button
Select this button when cooking anything with the rotating basket or the rotisserie kit. It can be used with any preset pro-
gram. The icon will blink while in use.
4. Temperature Control Buttons
These buttons enable you to raise or lower cooking temperature by 5°C intervals ranging from 65°C to 200°C. Dehydration
ranges from 30°C to 80°C.
) into the left rotation slot (Fig.A, nr.10)
) into the left rotation slot (Fig.A, nr.10) until it
) Into the right slot. Ensure that both
15
) onto the right slot. Ensure
EN