VATECH PaX-i PLUS PCH-30CS Manual Del Usuario página 43

Finishing Patient Positioning
1. After checking the positions of the patient and the laser beam, tighten the Temple
Supports OPEN/CLOSE Wheel under the control panel to prevent the patient's
head from moving.
2. Click the READY button on the Console Software. The X-ray exposure has not
started yet.
3. Now go to 3.3 X-ray Exposure to start the exposure.
PaX-i Plus User Manual
Make sure that the Temple Supports are in closed position
before clicking the READY button.
3. Acquiring PANO Images
35