BGS technic 3290 Manual De Instrucciones página 6

SAFETY INFORMATIONS
• Maintain the tool with care. Check hoses and compressed air connections at regular intervals.
• Do not use the tool if it is damaged. Have the tool repaired by specialist personnel.
• When installing regulators, filters and other accessories, observe the manufacturer
specifications of the compressed air system.
• Store the tool in a dry and safe location out of the reach of children.
IMPORTANT NOTES ON PERSONAL SAFETY
• Operate the tool using common sense.
• Do not wear loose clothing or jewellery that can be caught by moving parts and cause serious
injury.
• Only operate the tool at a safe distance from yourself and other persons
• Always ensure a firm foothold in order to be able to maintain your balance at all times.
• Never reach through or over electric cable or air hoses.
• Always work with a second person present; in event of an accident, this person can call for help
or medical assistance.
• Do not use this tool if you are under the influence of medication, alcohol or drugs, or if you are
tired. Read the package insert of your medicine in order to rule out an impairment of your
judgement or reflexes.
• Do not use the device if there is any doubt about the functionality of this tool.
• Always stay aware. During work, observe your workplace and carry out work with utmost care.
• Before use, check the tool for damage. If a part is damaged, use the tool again only after all
damaged parts have been repaired by an authorised specialist.
OCCUPATIONAL SAFETY
Always wear suitable protective equipment when using this air tool.
Safety glasses
•
• Hearing protection
Anti-slip safety shoes
•
• Work gloves
Hair net, if you have long hair
•
UNPACKING
When unpacking, make sure that all parts are present.
Contact your dealer if parts are missing or damaged.
SAFETY WHILE OPERATING
Take enough time for a careful selection of a working area. Take care that your workplace is near to
the compressor and blasting material. Attention! Always stay aware. Remove the device or other
objects from the working area. Persons and animals must not remain in the working area. Never
direct the air tool against persons or animals. Always wear safety equipment like safety glasses and
dust masks when working with this air tool (see chapter "Occupational Safety").
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed