Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Exhaust
vent
USING THE NOSE CAP
WARNING
When detaching or attaching the nose
cap, be sure to remove your finger from
the trigger and disconnect the air hose
from the stapler.
The nose cap is attached to the push lever tip to protect
the workpiece from scratches or damage. Remove in
the order shown below when not using.
NOTE:
The information contained in this Manual is
designed to assist you in the safe maintenance of
the Stapler.
Some illustrations in this Manual may show details
or attachments that differ from those on your own
Stapler.
MAINTENANCE AND INSPECTION
Read section titled "SAFETY" (pages 4 – 7).
WARNING
Disconnect air hose and remove all
staples from Stapler when:
1)
doing maintenance and inspection;
and
2)
clearing a jam.
1.
Clearing a jam
Remove a jammed staple in the following order:
1 DISCONNECT AIR HOSE.
2 Remove all staples.
3 Release the lock lever and open guide plate.
1 DISCONNECT AIR HOSE FROM STAPLER.
2 Pull out the nose cap in the direction of the arrow
as shown in the diagram.
Attach to the tip of the push lever in the reverse
Top cover
order of detaching.
MAINTENANCE
Lock lever
4 Remove the jammed staple with a slotted-
Firing head
Push lever
Nose cap
3
3
Guide plate
head screwdriver.
Guide plate
English
Disconnect
1
air hose
1
Disconnect
air hose
17
Publicidad
Tabla de contenido
