Hazardous Dust - Blastrac BDC-1133PM Manual Original

D
BLASTRAC BDC-1133PM / BDC-1133PH / BDC-1133PHC
GB
1. Never spray water on to the
F
upper section of the ma-
NL
chine.
I
N
S
Electric shock due to faulty
DK mains connecting lead.
Touching a faulty mains con-
SF
necting lead can result in seri-
E
ous or even fatal injuries.
P
1. Do not damage the mains
GR
power lead (e.g. by driving
TR over it, pulling or crushing
it).
SLO
2. Regularly check whether the
HR
power cord is damaged or
SK
shows signs of ageing.
3. If the electric cable is dam-
CZ
aged, it must be replaced by
PL
an authorized Blastrac/Dia-
H
matic distributor or similar
qualified person in order to
RO
avoid a hazard.
BG
4. In no circumstances should
RUS
the power supply cord be
wrapped around fingers or
EST
any part of the operators
LV
person.
LT
JA
ZH
KO
TH
MS
18
DANGER
2.2

Hazardous dust

WARNING
Hazardous materials.
Vacuuming up hazardous ma-
terials can lead to serious or
even fatal injuries.
1. The following materials
must not be picked up by
the machine:
– hot materials (burning cig-
arettes, hot ash, etc.)
– flammable, explosive,
aggressive liquids (e.g.
petrol, solvents, acids, al-
kalis, etc.)
– flammable, explosive dust
(e.g. magnesium or alu-
minium dust, etc.)
WARNING
Using the appliance for
asbestos abatement work
according to German reg-
ulation TRGS 519. To pick
up materials containing asbes-
tos:
Dust Class H machines (with
type designation PHC) can be
used for picking up asbestos.
1. Use a suction hose with
a maximum diameter of
36 mm.
*) Optional accessories / Option depending on model
Original instruction