Automatic Failure Alert And Action - VALBERG 15S39 D S701T Instrucciones De Uso

C

Automatic failure alert and action

Failure
Dose of brightener
code
F5 Insufficient amount of water
F3 Continuous water inlet
F2 Unable to drain water
F8
F1
FE Faulty electronic board
F7
F9 Divider position error
F6 Heater sensor failure
Installation and repair procedures should always be carried out by an authorised professional
from the service department to avoid any risks. The manufacturer declines all responsibility
for any damage resulting from procedures carried out by unauthorised persons. Repairs
should only be carried out by technicians. When a component needs to be changed, ensure
that original spare parts are used.
Incorrect repairs or failure to use original spare parts can cause considerable damage and
the user is exposed to a considerable risk.
The contact information for the customer service can be found on the back of this document.
According to the relevant ecodesign order, original and functional spare parts can be obtained for
at least ten years from the date of marketing of your appliance in the European Economic Area.
Useful information
Heating error
Water overflow
Overheating
33
Indicator
Ensure that the water inlet tap is open and that the
water is flowing.
Separate the hose from the tap and clean the hose
Contact the service department if the error persists.
Turn off the tap and contact the service department.
The water drain and filters may be blocked.
Turn off the programme.
If the error persists, contact the service department.
Contact the service department.
Unplug the appliance and turn off the tap
Contact the service department.
Contact the service department.
Contact the service department.
Contact the service department.
Contact the service department.
EN
filter.