Descargar Imprimir esta página

EIBENSTOCK ELS 225.1 Instrucciones De Servicio Originals página 18

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
Application for Indented Purpose
The ELS 225.1 designed for sanding primed drywall constructions, ceilings
and walls in internal and external applications, thermal insulation boards
as well as removing carpet residue, coats of paint and adhesives.
Attention!
Safety Instructions
Safe work with this machine is only possible if you read
this operating instruction and follow them strictly.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training. Save all
warnings and instructions for future reference.
If the connection cable gets damaged or cut during use, do
not touch it, but immediately pull the plug out of the socket,
Never use the tool with a damaged connection cable.
The tool must neither be wet nor used in humid environment.
Do not use this machine to perform work such as roughing,
brushing, polishing or disc sanding. Performing tasks for which the
machine is not designed can create hazards and lead to injury.
Never use accessories that were not specially developed and
intended for this machine. Just because an accessory part can be
fitted on your machine does not guarantee danger-free operation.
The permissible rotational speed of the accessory must be at least
as high as the maximum speed specified on the machine.
Accessories that rotate faster than the permissible level can rupture.
The outside diameter and the thickness of accessories must be
within the specified size range of the machine. Accessories with
incorrect dimensions cannot be sufficiently protected or controlled.
Do not use damaged accessories. Before use, always check
accessories such as sanding pads for nicks or cracks and check
support plates for cracks and excessive wear. Every time the ma-
chine is dropped, check the machine and accessories for damage,
Only with the original Eibenstock sanding
paper or grid and for this purpose optimised
Wet/Dry Vacuum Cleaner DSS 25 M an
optimal extraction can be assured. In order
to protect the user and the machine, the use
of
the
industrial
compulsory. In case of non-observance, you
might void your warranty claim.
17
vacuum
cleaner
is

Publicidad

loading