Install The Batteries - Keysight U1731C Guia De Inicio Rapido

All manuals and user guides at all-guides.com

Install the Batteries

Your LCR meter is powered by a single 9 V
alkaline battery (included with the shipment).
1 Turn the LCR meter OFF
and remove the test
leads from the terminals.
2 Lift the tilt stand and
loosen the screw with a
suitable Phillips
screwdriver.
3 Remove the battery cover and observe the
polarity markings.
4 Insert the battery and replace the battery
cover and screw.
4 Keysight U1731C/U1732C/U1733C Quick Start Guide