Assembly - Oreck Halo Guia Del Usuario

Assembly

All manuals and user guides at all-guides.com
The only assembly necessary before using the vacuum is to attach the
handle. Follow these steps:
Handle
assembly
Hex wrench
Handle attachment screw
10
1. Stand the vacuum up-right.
. Snap the wire connectors together.
3. Gently lift the handle and place the
aluminum tube over the main shaft of
the vacuum.
4. Slide aluminum tube down onto the
main shaft while pressing in the handle
attachment screw.
5. Use provided hex wrench (hanging from
handle) turn clockwise to tighten.
Aluminum tube
Main shaft
Wire
connectors