Troubleshooting; Part Number - Oreck Halo Guia Del Usuario

Trouble-
shooting
Part
Number
All manuals and user guides at all-guides.com
If the following troubleshooting tips do not resolve the problem please
contact Oreck Customer Service. U.S.: 1-800-989-3535
Canada: 1-888-676-7325
Important! Always unplug and allow the vacuum to cool down before
conducting any troubleshooting. See safety warnings.
Problem
The vacuum
will not turn
ON
The vacuum
stops running
The vacuum
has bad dust
pick-up
Brushroll not
spinning
Dust Bag, 8 pack, Saniseal
16
• Ensure the appliance is plugged into a wall outlet
• Check for damage to the plug or cord
• Check for blown fuse or tripped circuit breaker
in your home
• Check if the filter dust bag is full, replace
if necessary
• Check if the disposable filter dust bag is full,
replace if necessary.
• Adjust the height setting. The brushroll must rest
on the carpet for effective cleaning.
• Check if the brushroll is spinning, see: Brush-
roll Reset Button and safety warnings, do not
touch the bottom of the vacuum while hot!
• Check to ensure attachment door is firmly closed
• Ensure there are no fibers, strings or hair
wrapped around the Brushroll. See safety warn-
ings, do not touch the bottom of the vacuum
while hot!
• Press the ON/OFF button. If Brushroll is still not
spinning then press the Brushroll ON/OFF but-
ton. If the Brushroll is still not spinning, turn the
vacuum OFF and press the Reset Button located
on the bottom corner of the product.
Part
Hypo-Allergenic
®
Solution
Number
HB8PK