Before Calling For Service; Possible Cause - LG WM9500H Manual Del Propietário

Before Calling for Service

The washer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early
stage. If your washer does not function properly or does not function at all, check the following before you call for
service.
Noises You Might Hear
Noise
Water spraying or circulating during the
Spraying or Hissing
cycle.
Humming or Drain pump is pumping water from the
Gurgling washer at times during a cycle.
A liquid in the balance ring around
Water sloshing the wash basket helps the basket spin
smoothly.
The washer adapts to the load size and
type to add more water to the cycle as
needed.
Water being added
The wash load may be unbalanced.
after the washer has
If the washer senses that the load is
already begun to
unbalanced, it will stop and refill to
operate
redistribute the load.
The washer may be diluting laundry
additives to add to the wash load.
Rattling and Foreign objects, such as keys, coins, or
clanking noise safety pins may be in drum or pump.
Heavy wash loads may produce a
thumping sound.
Thumping sound
Wash load may be out of balance.
Packaging materials were not removed.
Wash load may be unevenly distributed
in the drum.
Vibrating noise
Not all leveling feet are resting fi rmly
and evenly on the floor.
Floor not rigid enough.
Squeak noise Packaging materials were not removed.
Plumbing in the home moves or flexes
Banging noise when
when the water valves in the washer
washer is filling
shut off.
with water (Water
Hammer)
Household water supply pressure is
very high.
All manuals and user guides at all-guides.com

Possible Cause

TROUBLESHOOTING
Solutions
Normal Operation
Normal Operation
Normal Operation
Normal Operation
Stop washer, check drum and drain filter for
foreign objects. If noise continues after washer
is restarted, call for service.
This is normal. If sound continues, washer is
probably out of balance. Stop and redistribute
wash load.
Pause the cycle and redistribute the load.
See the Unpack and Remove Shipping
Material information in the Installation section.
Pause the cycle and redistribute the load.
See Level the Washer in the Installation
section.
Make sure that the floor is solid and does
no flex. See Flooring in the Installation
Requirements section.
See the Unpack and Remove Shipping
Material information in the Installation section.
Water hammer is not caused by a defect in
the washer. Install water hammer arrestors
(purchased separately at hardware or home
improvement store) between the fill hose and
the washer for best results.
Adjust household water supply regulator to a
lower pressure or contact a plumber.
45