Detach Seat Pad; Cleaning And Maintenance - Nuna zaaz Manual Del Usuario

Adjust the Harness Restraint and Buckle
1
- Open the crotch cover. (5)
2
- To release the buckle, push on the "Nuna" button at the
center and remove the two clips. (6)
3
- Place the baby in the ZAAZ newborn seat.
4
- To lock the harness, insert each clip into the buckle and
listen for a click. (7)
5
- Always secure the infant in the restraint system
provided. (8)
Move the adjuster to adjust the webbing length to fit
your child snugly. (8)-1
Detach the ZAAZ newborn seat
1
- Press the release buttons on both sides of the ZAAZ
newborn seat to remove it from the ZAAZ high chair. (9)
DO NOT detach the ZAAZ newborn seat from the ZAAZ high
chair while it is in use.

Detach Seat Pad

1
- Remove the head support. (10)
2
- Open the buckle and pass the waist belt and crotch belt
through the slots on the seat pad. (11)
3
- Remove the seat pad. (12)
4
- To reassemble the seat pad, reverse above steps.
9
ZAAZ newborn seat Instructions

Cleaning and Maintenance

Wash the seat pad head support and crotch cover with cold
water and mild detergent.
DO NOT iron the seat pad.
DO NOT bleach or dry clean the seat pad.
DO NOT use undiluted neutral detergent, gasoline or other
solvents to wash the ZAAZ newborn seat. It may cause
damage.
Use only mild detergent, water and a soft cloth to clean the
seat shell.
DO NOT twist the seat pad with great force to dry. This may
wrinkle the seat pad.
Hang dry the seat pad in the shade.
If not in use for a long period of time, put the ZAAZ newborn
seat in a cool, dry place and somewhere your child cannot
access.
To clean the buckle: rinse using warm water. DO NOT use
any soaps, solvents or lubricants. Using anything other than
water can cause the buckle to dysfunction.
NUNA International B.V. Nuna and all associated logos are trademarks.
10
ZAAZ newborn seat Instructions