Grundig VCC 7670 A Manual Del Usuario página 17

Ocultar thumbs Ver también para VCC 7670 A:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33
SAFETY _______________________________
Do not dismantle the appli-
ance under any circumstanc-
es. No warranty claims are
accepted for damage resulting
from improper handling.
The vacuum cleaner is very
powerful; thus before plugging
the cord into the wall socket,
make sure the switch is in the
'off' position. Hold the vacuum
cleaner firmly when starting and
while using it.
If the inlet, hose or telescopic
tube is blocked, switch off the
vacuum cleaner and remove the
blockages before re-starting the
vacuum cleaner.
Washing filters improves vac-
uum performance. Make sure
all the filters are completely dry
before inserting back into the
vacuum cleaner.
Caution
The motor is equipped with a
thermal cut-out. If for any rea-
son, the vacuum cleaner should
over-heat, the thermostat will
automatically turn the unit off.
Should this occur, unplug the vac-
uum cleaner from the wall socket.
Remove the dirt container and
empty. Clean the filters. Allow the
cleaner to cool for approximately
1 hour. Continue operating the
appliance by inserting the pow-
er plug into the wall socket and
switching it back on. If the appli-
ance does not start, wait another
30 minutes and repeat the above-
mentioned steps.
ENGLISH
17

Publicidad

Tabla de contenido
loading

Tabla de contenido