Publicidad
Idiomas disponibles
Idiomas disponibles
®
VP for media:scape on ANSWER
1.
Unplug Answer media:scape power cord before
installing VP Server.
2.
Attach (2) stud mount fasteners to the back of the
VP Server.
3.
Align stud mount fasteners to keyhole slots in the lower left
corner of the pan assembly. Press in, then down.
4.
Connect the flag-style connector of the VP power supply
into the VP receiver (see page 5).
5.
Insert the 2-prong plug of the VP power supply into the
C-14-NEMA adapter (provided), route up to the electrical
box and connect to one of the four receptacles provided.
6.
To complete cable configuration for applications using
the switcher (see page 5), or (page 7) for wireless only.
7.
Attach network ethernet cable to VP Server.
8.
Enable input lag reduction setting (recommended,
see page 7).
9.
Plug the Answer media:scape power cord back in.
2
3
6
8
5
4
2329140 Rev G
Page 13 of 13
Publicidad
