Steelcase Virtual PUCK Manual Del Usuario página 3

®
2.
Install the VESA Plate within the
shaded area, shown to the right. Align
the arrow on the VESA Plate as shown.
3.
Add (2) stud mount fasteners to the
back of the Virtual PUCK Server.
4.
Secure Virtual PUCK Server onto
VESA Plate.
TIP: For ease of installation, drill (4) pilot holes
using the VESA plate as a template for the
fastener hole position.
VESA PLATE
Y
L A
S P
D I
2
3
D E
S I
BOTTOM VIEW
(UNDER TOP)
TIP: install the VESA plate within the
shaded boundary to prevent
interference when reinstalling the
cover. Be sure the arrow is in this
orientation.
4
TIP: Rotate the Virtual PUCK
SERVER into place using slot
pattern in plate.
Page 3 of 1
2329140 Rev G