Configuration - auna Silver Star Mini Manual Del Usuario

CONFIGURATION

Analog/digital
Time
Display
When it is enabled, my mediaU will exist on the main
MyMediaU
menu.If various mediaU accounts exist in the Radio, select
the default login account in here.
Netzwerk Wireless Network Configuration: Enable/disable WiFi
network. When you enable the WiFi network, the system
will automatically select the required AP. Enter WEP or
WPA code to connect the WiFi
Wireless Network (WPS PBC): If you are using a router
with WPS/QSS button, you may set up the network
connection simple via WPS function. Enter it and go to
press the WPS/QSS button on your router within 120
seconds. The connection between the router and device
will then be configured automatically.
Manual Configuration: You can choose DHPC (which IP
assigned automatically) or manually input IP address for
wireless network connection. When you select manual
setting for wired connection, the following have to be
entered: SSID (name of access point), IP Address, subnet
mask, default gateway, preferred DNS server, alternate
DNS server.
Check Network When Power On: : Enable/disable WiFi
network. When you enable the WiFi network, the system
will automatically search the available AP. Select required
AP.
Date & Time Setup the date and time
Set time format display as 12 Hour or 24 Hour.
Set date format (YYYY/MM/DD; DD/ MM/YYYY; MM/
DD/YYYY)
(Y=Jahr, M= Monat, D= Tag)
Daylight Saving Time :
"ON:, the time will be one hour More than the actual time.
OFF: the time will be same as the actual time. If it was
on the model of the "Daylight Saving Time(DST) and you
choose" OFF", the time will be deducted one hour ,that's
to say, the time will be same as the actual time.
EN
23