Technical Data - KNOTT KS25 Instrucciones De Montaje Y Servicio

Stabilisierungskugelkupplung – Montage- und Betriebsanleitung
Figure 2
While driving, stabilisation must be activated.
The operating lever must move freely and must not collide with the
vehicle or any other attachments, even with fully pushed-in drawbar and
maximum lateral rotation
We recommend that you consult the manufacturer beforehand if you are
planning to use a hitch device with ball or ball neck made of aluminium.

4. Technical data:

max. gross vehicle weight of the trailer
max. permissible
DC value of the combination
max. permissible vertical load
Possible drawbar connection
sizes for overrun device
* When using M12/M12 bolts to connect the coupling head to the draw
bar of the overrun device, the maximum permitted static vertical load is
S = 200 kg
The stabilising coupling heads can only be used on
ball pins with screw fastening if these are equipped
with an ADDITIONAL form-fit locking device against
twisting.
KS25
2500kg
27 kN
250kg
Ø50/45/40/35
5
KS30
3000 kg
27kN
* 300 kg *
version 5.00/2021 . 209692.002
KS35
3500 kg
31 kN
350kg
Ø60