Service Procedures - Kohler MASTERSHOWER Manual Del Usuario

SERVICE PROCEDURES

REDUCED FLOW OR
PERFORMANCE - - RELAXING
SPRAY
With water running through
the showerhead, firmly rub
your finger back and forth
across the spray holes in the
face of the showerhead to
dislodge debris and mineral
build-up.
If this fails to improve the
performance of the showerhead,
proceed as follows:
With the water turned off,
insert the showerhead tool
(provided) into the holes on the
face of the showerhead. Firmly
turn the tool counterclockwise
to loosen the aerator housing.
Carefully remove the aerator
housing, rubber gasket, and
aerator plate. Clean both sides
of the aerator.
Align the notches in the aerator
with the keyways in the aerator
housing to re-assemble.
Insert the aerator plate into the
aerator housing with the
small-diameter ring first. Align
the aerator plate notches with
the aerator housing keyways.
Reinstall the rubber gasket into
the aerator housing.
Carefully thread the aerator
housing into the showerhead
with the showerhead tool.
If this fails to improve the
performance of the product,
proceed to (Showerhead or
Handshower) Screen Washer on
Page 7.
A
1016116-5-
Notches
Aerator
4
Kohler Co.
Aerator Housing
Showerhead
Tool
Gasket
Aerator Plate