Kohler MASTERSHOWER Manual Del Usuario página 5

REDUCED FLOW OR
PERFORMANCE - -
INVIGORATING SPRAY
With water running through
the showerhead, firmly rub
your finger back and forth
across the spray holes in the
face of the showerhead to
dislodge debris and mineral
build-up.
If this fails to improve the
performance of the showerhead,
proceed as follows:
With the water turned off,
insert the showerhead tool
(provided) into the holes on the
face of the showerhead. Firmly
turn the tool counterclockwise
to loosen the pulsator housing.
Carefully remove the pulsator
housing, rubber gasket, and
rotor plate, and rotor. Inspect
the components for debris or
mineral build-up, and clean or
replace the parts as needed.
Reinstall the rotor to the
pulsator housing pin with the
flat deflector plate first.
Reinstall the rotor plate to the
pulsator housing with the flat,
smooth side up.
Reinstall the rubber gasket into
the pulsator housing.
Carefully thread the pulsator
housing into the showerhead
with the showerhead tool.
If this fails to improve the
performance of the product,
proceed to (Showerhead or
Handshower) Screen Washer on
Page 7.
Kohler Co.
Rotor
5
Pulsator Housing
Showerhead
Tool
Gasket
Rotor Plate
A
1016116-5-