Connecting The Mains Cable; Switching The Ac 3200 On And Off - Sennheiser AC 3200 Instrucciones De Uso

All manuals and user guides at all-guides.com

Connecting the mains cable

70 W

Switching the AC 3200 on and off

» ¿ ´
RF indicators
The AC 3200 has eight control LED
channels where transmission power is available.
¶
70 W
Connect the suitable mains cable to the IEC mains socket
and to the mains.
Note:
The AC 3200 can be connected to any mains power supply
with 100 V to 240 V AC (50 to 60 Hz).
Press the on/off switch
The AC 3200 switches on and the LED
Press the on/off switch
The AC 3200 switches off and the LED
Note:
After switch-off, the AC 3200 is in standby mode. To
disconnect the device from the mains, pull out the mains
connector from the wall socket.
Putting the AC 3200 into operation
¶ ¶
´.
¿
lights up red.
´
again.
¿
goes off.
»
which light up on the
¶
²
11