Wiseup Sport 10 Guia Del Usuario página 7

4.2.3. Press the Power Button once. The camera will take a picture every 3
seconds automatically and the indicator light will flash red once every 3 seconds.
4.2.4. Press the Power Button once again to stop taking photos continuously.
The camera will vibrate once and the indicator light will be solid red, indicating
the camera is back to standby mode.
4.2.5. Power off the camera by pressing the Power Button for 2 seconds again.
The camera will vibrate once, the indicator light will turn blue and then turn off.
[Note]:
Picture Format: JPG Picture Resolution: 3264x2448
4.3. RECORDING AND CHARGING SIMULTANEOUSLY
4.3.1. Slide the Mode Switch to the video recording position and slide the
USB Mode Switch to the charging and recording position .
4.3.2. Connect the camera to a power bank or an outlet power supply by using
the USB cable and charging adapter provided.
4.3.3. The camera will be powered on and then start recording automatically.
The camera will vibrate once, the blue indicator light will flash once and then
keep flashing.
4.3.4. Press the Power Button once to stop recording video. The camera will
vibrate once and the indicator light will be solid blue, indicating the camera is
back to standby mode.
V. Video/Image Files Uploads
5.1. Option One: Using a Card Reader
5.1.1. Power off the camera, remove the Micro SD card and insert it into a card
reader.
5.1.2. Insert the card reader into a proper PC computer USB port.
5.1.3. The card reader will be recognized as a removable disk drive.
5.1.4. All the files can be accessed in the drive.
5.2. Option Two: Using the USB cable
5.2.1. Power off the camera and slide the USB mode switch to the data transfer
position .