Wiseup Sport 10 Guia Del Usuario página 8

5.2.2. Connect the camera to a proper PC computer USB port by using the USB
cable provided. The indicator light will flash blue once and then keep flashing
red.
5.2.3. The camera will be recognized as a removable disk drive.
5.2.4. All the files can be accessed in the drive.
VI. Setting Time/Date Stamp and Video Length
6.1. Power off the camera, remove the Micro SD card and insert it into a card
reader.
6.2. Insert the card reader into a proper PC computer USB port.
6.3. Removable disk drive folder appears.
6.4. Click on the drive in the root directory and inside the root directory, create a
file named "time.txt".
6.5. Write the current date, time and desired video length in the "time.txt" file with
the correct format: for example: 2016.04.12 14:24:32 Y 3.
"Y" means the time stamp on the video is enabled; "3" means each video length
will be 3 minutes.
If you don't need the time stamp, change "Y" into "N" in the "time.txt" file (For
example: 2016.04.12 14:24:32 N 3).
If you want to extend video clip's duration time, change 3 into 4, 5 or 6 in the
"time.txt" file. (For example: 2016.04.12 14:24:32 N 6).
6.6. Save this file and restart the camera. The system will upgrade the program
automatically.
VII. Charging Only
7.1. Remove the Micro SD card from the camera.
7.2. Connect the camera to an outlet AC power supply by using the USB cable
and the DC5V charging adapter provided.
7.3. The indicator light will keep flashing red during the charging process.
7.4. It will take 2.5 hours to obtain a full charge.
7.5. The indicator light will be solid red when the camera is fully recharged.