Video Recording - Wiseup Sport 10 Guia Del Usuario

already and is securely fitted into the camera's SD card slot, or the camera will
not work. A SDHC Class 10 Micro SD card is recommended. If no Micro SD card
is fitted into the camera, the indicator light will turn blue and be off in 2 seconds,
then it will flash red 8 times and turn off again, the camera will shut down
automatically.
[Note]:
The camera will shut down automatically if it is in standby mode without any
operation more than 2 minutes.

4.1. VIDEO RECORDING

4.1.1. Slide the Mode Switch to the video recording position .
4.1.2. Power on the camera by pressing the Power Button for 2 seconds. The
camera will vibrate once; the indicator light will flash blue once and then be solid
blue, indicating the camera has entered into standby mode.
4.1.3. Press the Power Button once to record video. The indicator light will keep
flashing blue.
4.1.4. Press the Power Button once again to stop recording video. The camera
will vibrate once and the indicator light will be solid blue, indicating the camera is
back to standby mode.
4.1.5. Power off the camera by pressing the Power Button for 2 seconds again.
The camera will vibrate once, the indicator light will flash blue once and then turn
off.
[Note]:
1). A video file will be generated and saved every 3-6 minutes automatically.
2). The camera can record videos continuously for 3.5 hours on a full charge.
3). Video Format: AVI Video Resolution: 1920x1080P
4). Loop recording is supported.
4.2. CAMERA/STILL PHOTOGRAPHY
4.2.1. Slide the Mode Switch to the camera position .
4.2.2. Power on the camera by pressing the Power Button for 2 seconds. The
camera will vibrate once; the indicator light will flash blue once and be solid red,
indicating the camera has entered into standby mode.