Care And Maintenance - EDM Product 08681 Manual De Instrucciones

react, but not dry.
▶Spray loose dirt with high pressure Met. The mixture to the
maximum can adjust the flow of detergent.
AFTER OPERATION WITH DETERGENT
▶Remove the clean hose detergent bottle from the inlet and close it
with the cap.
▶To store, place the detergent bottle in the holder with the cap up.
INTERRUPT THE OPERATION
▶Release the trigger lever.
▶Lock the trigger lever.
▶Place the trigger with the spray lance in the park position.
▶During longer breaks (more than 5 minutes), also turn off the
appliance using the "OFF / ON" switch.
END OPERATION
▶Suelte la palanca del gatillo.
▶Apague el aparato "0/1".
▶Desconecte el enchufe de red de la toma de corriente.
▶Solo separe la manguera de alta presión de la pistola de gatillo o del
dispositivo cuando no haya presión en el sistema.
▶APAGAR GRIFO
▶Presione la palanca del gatillo para liberar cualquier presión
restante en el sistema.
▶Suelte la palanca del gatillo.
▶Bloquear la palanca del gatillo.
WARNING: When disconnecting the supply or high pressure
hose, warm water may come out of the connection after
operation.
TRANSPORT
WARNING: Risk of personal injury or damage. Be careful
with the weight of the appliance during transport.
WHEN TRANSPORTING BY HAND
▶Turn off the product and disconnect it from the water and electrical
supply.
▶Pull the carrying handle until it audibly engages. Fit shipping
protectors, if applicable.
▶Pull the appliance out by its carrying handle.
WHEN TRANSPORTING IN VEHICLES
▶Before horizontal transport: close the cap of the clean detergent
bottle.
▶Tilt the product towards you until it is balanced on the wheels. Then
Instruction manual
▶Protect the product from any strong impact or vibration that may
▶Secure the appliance so that it does not move or tip over.
STORAGE
▶ Park the machine on a flat surface.
▶ Separate the spray lance from the trigger gun.
▶ Press the disconnect button on the trigger gun and remove the high
▶ Place the trigger gun in the storage for the trigger gun.
▶ Place both spray lances in the spray lance storage.
▶ Dirt crusher spray lance: Nozzle down.
▶ Roll up the high pressure hose and hang it over the hose storage.
▶ Store the network connection in the accessory compartment.
▶ Before long periods of storage, such as during winter, also observe
▶ Always store the pressure washer, parts and accessories out of
▶ We recommend using the original packaging for storage or covering
FROST PROTECTION
▶The appliance and accessories that are not completely drained can
▶Completely empty the appliance and accessories and protect them
▶Disconnect the appliance from the water supply.
▶Separate the spray lance from the trigger gun.
▶Turn on the device "0/1".
▶Push the trigger lever until no more water comes out.
▶Release the trigger lever.
▶Lock the trigger lever.
▶Turn off the appliance "0/1".
▶Store the appliance and all accessories in a frost-free room

CARE AND MAINTENANCE

move it by its carrying handle.
occur during transportation in vehicles.
pressure hose from the trigger gun.
the instructions in the care section.
reach of children. The ideal storage temperature is between 10 ° C
and 30 ° C. Store the pressure washer indoors to prevent the water
in the unit from expanding in freezing conditions.
the product with a suitable cloth or box to protect it from dust.
be destroyed by frost.
from frost. To avoid damage:
WARNING: Risk of electric shock. Before carrying out any
work on the appliance, switch it off and unplug the power
cord.
08681
REF.
ES
PT
EN
FR