Problem Solving - EDM Product 08681 Manual De Instrucciones

PROBLEM SOLVING

DANGER RISK OF ELECTRIC SHOCK
Turn off the appliance and remove the main plug before carrying out any care and maintenance work. Repair work and work on electrical components
cannot only be carried out by authorized customer service. You can correct minor faults yourself with the help of the following overview. If in doubt,
consult authorized customer service.
SYMPTOM
The machine refuses
lets start
Fluctuating pressure
The machine stops
Pulsing machine
The machine starts,
but no water comes out
Instruction manual
CAUSE
Machine not plugged in
Faulty socket
The fuse has blown
Faulty extension cord
Pump sucking air
Dirty, worn, or stuck valves
Worn pump gaskets
Incorrect mains voltage
Thermal sensor activated
Partially blocked mouthpiece
Air in inlet hose
Inadequate supply of mains water
Nozzle partially blocked
Water filter blocked
Hose kinked
Pump/hoses or accessory frozen
No water supply
Water filter blocked /Nozzle blocked
08681
REF.
ACTION
Plug in the machine
Try another plug.
Replace the fuse.
Turn off other machines.
Try without the extension cord.
Check that the hoses and
connections are watertight.
Clean and replace or consult
to the local dealer.
Check that the mains voltage
corresponds to the
label specifications
model. Let the washing machine
chill for 5 minutes.
Clean the nozzle
Air in inlet hose
Inadequate water supply
network
Partially blocked mouthpiece
Blocked water filter
Kinked hose
Pump / hoses or accessory
frozen
No water supply
Filter / Nozzle blocked
ES
PT
EN
FR