Replacing The Batteries - Etekcity ESF-551 Manual Del Usuario

EN
Cleaning the Smart Scale
• Use a slightly damp cloth to clean the surface of the scale,
followed by a soft, dry cloth to wipe away any remaining
moisture.
• Do not use chemical or abrasive cleaning agents to clean the
scale.

Replacing the Batteries

The display will show "Lo" when the batteries need to be replaced.
1. Open the battery compartment on the underside of the scale.
2. Remove the old batteries and dispose of them properly.
3. Install 3 new 1.5V AAA batteries, making sure they are placed
under the correct polarity.
4. Replace the battery compartment cover.
Note: The scale may need to be calibrated after replacing the batteries.
23