About Your Product; Intended Use; Indications For Use; Package Contents - Stryker VisionPro EDAM Manual Del Usuario

All manuals and user guides at all-guides.com

About Your Product

The VisionPro Display EDAM is an accessory to the VisionPro 26" LED Display (0240-031-020) and
the SDC3 Information Management System with the Device Control Package (0240-060-102)
installed� The EDAM transfers device control data from the SDC3 to the Display�

Intended Use

The VisionPro Display EDAM is intended to be used to transfer device control data to or from the
SDC3 to the VisionPro 26" LED Display and allow this device to be controlled by the SDC3� The
EDAM does not initiate any device control data and only acts as an electronic transfer medium
for SDC3� The EDAM is a non-sterile reusable device not intended for use in the sterile field� It is
intended for use in surgical procedures where both the Display and SDC3 are installed�

Indications for Use

General surgical population�

Package Contents

Carefully unpack the VisionPro Display EDAM and make sure all components are accounted for
and undamaged� If any damage is detected, refer to the Stryker Standard Warranty�
VisionPro Display EDAM (0240-031-021)
DB9 Male to Female Null Cable (P26380)
USB-A to USB-B cable (0105-187-988)
Velcro Strips for mounting the EDAM (0105-202-588)
EN-3