Mounting The Edam; Connecting The Visionpro 26" Led Display To The Sdc3 - Stryker VisionPro EDAM Manual Del Usuario

All manuals and user guides at all-guides.com

Mounting the EDAM

Mount the EDAM in a secure location using the Velcro strips provided with the package�
1� Carefully peel the paper backing from the adhesive side of the Velcro strips�
2� Attach one Velcro strip to the underside of the EDAM and the other Velcro strip to the
desired location�
3� Press the two strips together firmly to mount the EDAM�

Connecting the VisionPro 26" LED Display to the SDC3

4
3
1� VisionPro 26" LED Display - Connect the male connector end of the DB9 cable to the
Display�
Note: If the Display is installed in an Integrated Suite, a DB9 cable should already be
connected.
EDAM, DB9 Connector - Connect the other end of the DB9 cable to the EDAM adapter�
2�
EDAM, USB Type B Connector - Connect the Type B end of the USB cable to the EDAM
3�
adapter�
EN-4
2
1